Your position: Home > CO2 Laser Power Supply

60W Co2 Laser Power Supply for Laser Engraving Cutting Machine MYJG-60W

CO2 laser power supply widely used in laser processing for example, cutting, drilling,sculpture, engraving etc and laser systems.
Item Code: LMC-P-60W-M
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
    Please select the information you wantX
  • Voltage:
    110V 220V
197 in Stock
  • Description
  • Order record
60W Co2 Laser Power Supply for CO2 Laser Engraving and Cutting Machine MYJG-60W

Product Features:

1. Good compatibility: it can be applicable to 60W Laser Tube manufactured by various factories.
2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Button to test output laser manually.
7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.

Main Technical Parameters:
Name 60W
AC input voltage AC220V or AC110V(please specify, when order)
AC input frequency 47~440Hz
Maximum voltage output 24KV
Maximum current 25mA
Power size(mm) 197*161*91
Weight(kgs) 2.1
Efficiency 91%
Over current protection 130% of maximum current
Open circuit protection Yes (short time)
Structure Fan cooling
High level control voltage range ≥3V
Low level control voltage range ≤0.8V
Operating temperature -30℃~+65℃
Relative humidity 20~85%RH(non condensing)
Withstand voltage Input—output AC1500V1 min ≤10mA
Input—shell AC1500V1 min ≤10mA
Output—shell Connection
Insulation resistance ≥50MΩ(DC500V)
Earth leakage current ≤1mA(AC220V)≤0.5 mA(AC110V)
Vibration resistance Amplitude 0.5mm frequency 10~55Hz three-dimensional direction 2h
Fault-free time MTBF ≥30,000hours
60ºC high temperature test time on full load 12 hours
7s power on/off test 500 times

Connection Between Laser Tube and Power Supply:

Pin Definition:

Terminal Definition:
1 2 3 4 5 6

Terminal definition as follow:
TH Input Signal Switch Light Control,High Level(>=3V)-Bright dipping,Low Level(<=0.3V)-No Light Dipping
TL Input Signal Switch Light Control.High Level-No light Dipping,Low Level(<=0.3V)-Bright Dipping
WP*1 Input Signal Switch Light Control,High Level(>=3V)- No light Dipping,Low Level(<=0.3V)-Bright Dipping
G Signal Ground The foot must connected with laser machine's enclosure and ground properly.
IN*2 Input Signal Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control
5V Output Power 5V,Max output Current 20mA

Connection Between Laser Power Supply and Controller:
Buyer Country Price Quantity Order Date
prec*** United States $85.00 1 2019-08-25
kmas*** Saudi Arabia $85.00 1 2019-07-07
kmas*** Saudi Arabia $85.00 1 2019-07-07
Customer Reviews
+86 13552452963